Biofuel

The term biofuels usually refers to liquid fuels and blended components that are produced from biomass materials which are referred to as feedstocks. Biofuels are used as transportation fuels, as well as for heating and electricity generation.

Close-up of green, yellow, and blue fuel nozzles at a diesel pump station
How Renewable Diesel Is Made 940 788 Star Oilco

How Renewable Diesel Is Made

Renewable diesel is a type of biofuel called biomass based diesel

How Renewable Diesel is Made

How is Renewable Diesel made?

Very similarly to fossil fuel diesel.

In the 1990’s the world started moving towards an ultra-low sulfur diesel fuel specification. Over decades we have arrived to where even marine fuels are running a lower sulfur fuel. The technology used to achieve this is hydrotreating the distilled crude oils.  By use of hydrocrackers, the molecules of petroleum crude oils are cracked and reformed into ultra-low sulfur diesel.  The use of hydrotreating diesel fuels has enabled the removal of sulfur and then enabling the use of emissions systems that not only reduce acid rain but also smog causing emissions like NOx.  This advanced petroleum refining chemistry technology is the forebearer to today’s renewable diesel technologies.  The technical chemistry of taking a feedstock, cracking the molecules and reforming them into a final product is where renewable diesel comes from.

Renewable diesel is a type of biofuel that is chemically similar to petroleum diesel and can be used in any diesel engine. It can be produced from various feedstocks, such as vegetable oils, animal fats, waste cooking oil, and algae. Renewable diesel can reduce greenhouse gas emissions and improve air quality compared to petroleum diesel⁵.  The inputs for renewable diesel are typically low value but high btu value feedstocks.   From virgin soy bean and canola oils to the lowest grade municipal wastes.  The modern chemistry of today’s petrochemical industry transforms them into the highly sought fuels. 

There are two processes making renewable diesel.  Hydrogenation and Fischer Tropsch Pyrolysis.

The most common way to produce renewable diesel is by hydrotreating, commonly referred to as hydrocracking, which involves reacting the feedstock with hydrogen under high temperature and pressure in the presence of a catalyst.  Renewable diesel made with this process is often called Hydogenated Vegetable Oil (HVO). HVO and Renewable Diesel are the same fuel.  Utility scale power generation often will refer to HVO as their technical term for this low CO2 biofuel.

How HVO is made is extremely similar to crude fossil fuel.  The investments to do it also cost billions of dollars similar to the costs of petroleum refining.  Imagine a vegetable or animal fat being put under pressure, the molecules are cracked into smaller chain molecules and as this stream of feedstock is passed in the presence of a catalyst as hydrogen is added it forms hydrocarbon molecules like diesel, jet fuel, and propane.   This process removes oxygen, sulfur, nitrogen, and other impurities from the feedstock and converts it into hydrocarbons that are similar to those in petroleum diesel⁴⁵. Hydro processing is also used in petroleum refineries to upgrade crude oil into various fuels, such as renewable diesel. 

Other ways to produce renewable diesel include pyrolysis, usually using a Fischer Tropsch process.  Pyrolysis is usually made from high energy content dry garbage.  Think wood waste, plastics, tires, and other high Btu content waste streams.  These garbage feedstocks are transformed into hydrocarbons with a process of heating the feedstock in the absence of oxygen to produce a liquid bio-oil that can be further upgraded into renewable diesel; gasification, which involves converting the feedstock into a mixture of carbon monoxide and hydrogen (syngas) that can be synthesized into renewable diesel; and biochemical and thermochemical technologies, which involve using enzymes, microorganisms, or catalysts to convert the feedstock into renewable diesel⁴. 

According to the U.S. Energy Information Administration (EIA), U.S. production capacity for renewable diesel could increase significantly through 2030, based on several announced and developing projects. This growth is driven by higher state and federal targets for renewable fuel, favorable tax credits, and the conversion of existing petroleum refineries into renewable diesel refineries². As of the end of 2020, U.S. renewable diesel production capacity totaled nearly 0.6 billion gallons per year (gal/y), or 38,000 barrels per day (b/d). Several projects currently under construction or completed can jump this capacity up billions of gallons.  could increase this capacity by 2.4 billion gal/y; proposed and announced projects would add another 1.8 billion gal/y by 2024. If all projects come online as intended, U.S. renewable diesel production would total 5.1 billion gal/y (330,000 b/d) by the end of 2024². 

Globally, over 1.45 billion gallons of renewable diesel are produced annually and are forecasted to grow up to 3.34 billion gallons in 2024. Neste, a Finland based petroleum refining company, is currently dominating the production of renewable diesel¹. Other major producers in the United States include Chevron, BP, Seaboard Energy, Phillips 66, HF Sinclair, Montana Renewables, Marathon, and Diamond Green Diesel¹. 

Resources:

(1) Renewable Diesel – Alternative Fuels Data Center.

(2) Renewable Diesel and Biodiesel Basics – EIA 

(3) U.S. renewable diesel capacity could increase – EIA

(4) Renewable Diesel: The Fuel of the Future – FutureBridge.

(5) Overview of the Production Capacity of U.S. Renewable Diesel Plants

Diesel fuel flowing into a dark reflective liquid surface
What Are Our Options for Alternative Fuels? 1024 578 Star Oilco

What Are Our Options for Alternative Fuels?

What are our options for alternative fuel?

Biofuels are eco-friendly fuel choices because they are made from renewable resources and produce fewer emissions than fossil fuels. Biofuels and biodiesel can also be used to improve air quality. They also allow us to reduce the dependence we have on using fossil fuels. 

Biofuels are liquid fuels produced from biomass, which is organic matter such as plants, algae, and agricultural waste. Biofuels can be used to power vehicles, generate electricity, and heat homes and businesses.  Biofuels are renewable and can reduce emissions of greenhouse gases. They provide an alternative to fossil fuels and help to conserve natural resources. Reducing the emissions of greenhouse gases is an important factor in helping to combat climate change. Biofuels have the potential to be a significant part of the solution. Biofuels can reduce emissions of greenhouse gases by replacing fossil fuels, which are made from non-renewable sources. Using biofuels instead of fossil fuels can also help to reduce air pollution. 

Some common types of biofuels include: 

Ethanol

Ethanol is a type of alcohol that is made from fermented corn, sugarcane, and other crops. It is blended with gasoline to create E85, a fuel that can be used in flexible-fuel vehicles.  This type of fuel is cheaper than regular gasoline, and it is more environmentally friendly. It is also safer to store and transport than other types of fuel. The benefits of using ethanol fuel include reduced emissions of carbon dioxide, improved air quality, and increased energy security. It is also renewable and biodegradable, making it a more sustainable fuel choice. Additionally, the production and use of ethanol fuel can create jobs and support local economies. 

 

Biodiesel

Biodiesel is a type of diesel fuel that is made from vegetable oils, animal fats, and waste grease. It can be used in unmodified diesel engines as a drop-in solution. It is a renewable fuel and emits less carbon dioxide than petroleum-based diesel. Biodiesel is also less toxic and it’s biodegradable. The benefits of biodiesel include reduced emissions of carbon dioxide, sulfur dioxide, carbon monoxide, and unburned hydrocarbons; improved combustion efficiency and power output; improved lubricity; and improved fuel economy. Additionally, biodiesel is biodegradable and has a lower energy content than petroleum-based diesel, making it safer to handle and transport in the Portland, Oregon metro area as well as Vancouver, Washington. 

Biodiesel can be used in a variety of applications, including transportation, heating and electricity. Biodiesel is used in transportation to power diesel engines in cars, trucks, buses, and other vehicles. Biodiesel can also be used to heat homes and businesses. Biodiesel also can generate electricity in power plants.  

Biodiesel is a promising alternative to petroleum diesel, and its use is growing around the world. The United States is the world’s largest producer of biodiesel. 

Algae-based biofuels

Algae-based biofuels are a new type of biofuel that is made from algae. Algae are a rapidly renewable resource that can be grown in a variety of environments. Algae is a group of photosynthetic organisms that grow in water. Algae have the potential to produce significantly more oil than traditional biofuel crops, such as corn and soybeans, and they can be grown on non-arable land, such as saltwater or wastewater. This makes algae an attractive potential source of renewable fuel. 

When algae are grown in the right conditions, they can produce up to 77% oil, which can be converted into biodiesel, renewable diesel, or other biofuels such as ethanol, butanol and jet fuel. Algae-based biofuels have the potential to significantly reduce greenhouse gas emissions from transportation, electricity generation, and other industries. However, there are still challenges that need to be overcome before algae-based biofuels can be commercially viable. These challenges include scalable production, costs, efficient harvesting and efficient processing to extract the oil. There is a lot of research and development underway to overcome these challenges and with continued investment, algae-based biofuels have the potential to become a major source of renewable fuel in the future. 

 

Hydrogen

Hydrogen is a versatile energy carrier that has the potential to play a significant role in the transition to a clean energy future. It is the most abundant element in the universe and can be produced from a variety of sources, including natural gas, biomass, and renewable electricity. When used in a fuel cell, hydrogen produces only water and heat, making it a clean and efficient fuel source. 

Using hydrogen as a fuel provides clean burning, a high energy density, efficiency, among many other benefits. Hydrogen doesn’t produce any emissions of harmful pollutants which makes it an attractive option as a fossil fuel alternative. Hydrogen’s high energy density means that a relatively small amount of hydrogen can provide a lot of energy. Using hydrogen fuel cells to generate electricity are 2-3 times more efficient than internal combustion engines. It can also be used in a wide range of applications, including transportation, electricity generation as well as industrial processes.  

Some of the challenges we face with hydrogen as a fuel are its current methods of production. They are not always as clean or sustainable currently. Storing hydrogen, being a gas, requires specialized storage tanks. The infrastructure for transporting and distributing hydrogen is not yet fully developed.  

Overall, there is a growing interest in using hydrogen as a fuel source with very promising results and possibilities in our future. Governments and businesses all over the world have been investing in research and development to figure out solutions to these challenges in order to make hydrogen a more viable energy source.  

Renewable Diesel

Renewable diesel can also be known as hydro-treated vegetable oil (HVO) or green diesel, and is a type of biofuel that is chemically identical to petroleum diesel. It is produced from a variety of feedstocks, including vegetable oils, animal fats, and waste oils. Renewable diesel can be used in any diesel engine without modification, and it offers a number of environmental benefits over petroleum diesel, including: 

 

Reduced greenhouse gas emissions 

Renewable diesel (R99) reduces greenhouse gas emissions by up to 90% compared to petroleum diesel. R99 being cleaner and more efficient, makes it an attractive option for many transportation companies. 

 

Improved air quality 

Renewable diesel produces fewer harmful pollutants, such as particulate matter and sulfur oxides, than petroleum diesel. Additionally, renewable diesel is lower in carbon than petroleum diesel, making it a more sustainable option for transportation. Renewable diesel is also more efficient, reducing the amount of energy needed to produce the same amount of fuel. 

 

Biodegradability  

Renewable diesel is biodegradable, meaning that it breaks down naturally in the environment.  This helps to reduce the amount of harmful pollutants in the environment. Renewable diesel also reduces emissions of carbon dioxide, a major contributor to climate change. 

Renewable diesel is a promising alternative to petroleum diesel, and its use is growing around the world. The United States is the world’s largest producer of renewable diesel, and the European Union has a mandate to use 10% renewable diesel by 2030.  

Even more of the benefits of using renewable diesel:  

The use of renewable diesel helps reduce our dependence on fossil fuels since it is a renewable fuel.  

The local economy can be supported by renewable diesel, which is often produced from local crops.  

A number of sectors, including agriculture, manufacturing, and transportation, create jobs in the renewable diesel industry.  

Ultimately, renewable diesel is a clean and sustainable fuel that offers environmental and economic benefits. Around the world, its use is growing as an alternative to petroleum diesel. Renewable diesel helps to reduce air pollution, reduce greenhouse gas emissions, and reduce dependence on foreign oil. It is also a renewable and sustainable fuel source that can be used to produce electricity. As such, renewable diesel is an important option for reducing carbon emissions and improving sustainability overall. 

When we look at the variety of renewable and biofuel opportunities, there are a variety of ways that we can reduce our carbon footprint today without any modifications to our current engines. However, long term, we have opportunities that we can explore for where we believe that our future is going and the solutions that can allow for an even greater impact to our Pacific Northwest carbon footprint and reducing greenhouse gas emissions. Among all of the renewable resources, we can reduce air pollution, increase economic benefits and create a more sustainable future for the Portland, OR and Vancouver, WA metro areas. As technology continues to improve and the production of biofuels and biodiesel becomes more efficient, these fuels are likely to become more affordable and widely available. Feel free to give Star Oilco a call today to discuss your fueling needs today and how we can provide you with renewable sources today as a drop-in solution. 

JOIN THE FUEL MARKET REPORT NEWSLETTER FOR YOUR WEEKLY FILL OF UPDATES!

Name

Construction Loaner Diesel Tanks
Diesel Fueling for Construction Jobsites 720 720 Star Oilco

Diesel Fueling for Construction Jobsites

Diesel fueling for construction jobsites in Portland, Oregon.

Keep full service for construction jobsites with R99 Renewable Diesel available.

Diesel Fuel for Construction

 

If you are managing a project we will keep that jobsite full.

Diesel fueling for construction jobsites seven days a week in the Portland metro region.  We have a variety of diesels accompanied with DEF top off to keep your operation running without interruption. We can provide a consistent schedule to keep going seven days a week.  If you are running generators, blowers, heaters and other 24-7 equipment we can keep those running through the weekends.  Our autofill construction service can provide the fuel you need, tanks for your project, and regular scheduled service to guarantee uptime.

Does your diesel fueling for construction needs call for a guaranteed stops on a schedule? Do your projects sometime require every 12 hour or 6 hour fueling? Does you fueling project needs call for generators, heaters, reefer-trailers, light sets, and yellow iron?  Star Oilco can do a few gallons wet hose fueled into your equipment to 100,000+ supply contracted for your project.  We have trucks dispatched seven days a week with several shifts.  Star Oilco can do twice a day fueling if needed for your project including regular 0 gallon stop by visits to confirm your equipment is running.

We can keep your generators running, your heaters blowing hot air, your pumps pumping, and your crew running without having to stop for fuel or DEF!

 

Fueling Back Hoe on construction site

Jobsite fueling service to meet the needs of your project management.

Off Road Diesel, Dyed Renewable Diesel and DEF available for your project need.

 

Mobile Fueling of Construction site in Portland, Oregon

Keep Full Mobile Onsite Fueling

Star Oilco can provide scheduled mobile fueling to your jobsite seven days a week.  Our diesel construction fuel service includes onsite tanks as well as DEF equipment for your project needs. At start of shift and end of shift schedule is also available for delivery.

 

 

 

Tight Access Diesel Construction Fueling Available.

Star Oilco’s fleet includes smaller fuel trucks able to access tight to reach areas in parking garages, active facilities, back alleys, inside buildings, and other hard to reach areas required by a project.

 

 

 

 

DEF Delivery Included with your Diesel Fueling.

Diesel Exhaust Fluid (DEF) keep full and bulk delivery service to your jobsite.  We have DEF bulk equipment as well as boxes available for your project.  What you want for your operations is what we want. Keeping those small DEF tanks full and generators running is what we can do for you.  We are here to make it easy.

 

 

 

Renewable Diesel in Oregon

Dyed Renewable Diesel for your Diesel Construction Fueling needs.

Does your project require a lower CO2 footprint?  We have off-road R99 Renewable Diesel on our trucks daily.  Star Oilco also has multiple sources for R99 in the Pacific Northwest for your needs to guarantee supply. If large volumes are needed for Renewable Diesel for a project in the future we can enable a contract to meet these needs.

 

 

Construction Loaner Diesel Tanks

 

Diesel Fueling Construction Tanks available.

Star Oilco has fuel tanks available for your project.  Our typical inventory of tanks sizes are 250 and 500 gallon UL142 double wall thanks.  We have 100 and 50 gallon fuel cells for moving fuel around a jobsite in the back of a fuel truck. Larger sizes available for longer term and larger projects with advance planning.

 

 

 

Wet Hose Fueling Service in Vancouver, WashingtonStar Oilco can provide your project with the fuel you request.
– B5 ULSD Dyed Diesel
– B20 ULSD Dyed Diesel
– Dyed R99 Renewable Diesel
– E10 Gasoline
– Non-Ethanol Premium Gasoline
– Kerosene, and others if the project calls for it.

Schedule Your Fuel Delivery Today

  • This field is for validation purposes and should be left unchanged.
Star Oilco black fuel truck parked on rural road with trees in background
What Is Portland’s Renewable Fuel Standard? 1024 768 Star Oilco

What Is Portland’s Renewable Fuel Standard?

Diesel Fuel Is Changing In Portland With The Renewable Fuel Standard (RFS)

Portland Old Town sign representing the city’s commitment to renewable fuel standards

Figuring out what this means for you or your business can be challenging. We have shared many questions that we have been asked already, to help provide more clarity on what this Renewable Fuel Standard (RFS) means for Wholesale Purchaser-Consumers​. If your question isn’t listed below, please reach out to Star Oilco so we can make sure your questions are answered!

I Have Questions

Choose Star Oilco As Your Preferred Fuel Delivery Company

Contact Us

What is the Portland's Renewable Fuel Standard?

The Renewable Fuel Standard (RFS) is Portland City Council’s response to the City’s 2022-2025 Climate Emergency Workplan,  which lists the City’s priority actions over the next three years.​

On Dec. 7, 2022, City Council unanimously adopted amendments to the Renewable Fuel Standard, Portland City Code Chapter 16.60, which reduces dependence on nonrenewable fossil fuels, by increasing the required percentage of renewable fuels blended with petroleum diesel sold in the city of Portland.​

This policy increases low-carbon biofuel blends, moving Portland’s diesel fuel mix to 99% renewable by 2030. This policy includes a carbon intensity standard to shift to fuels that are lower carbon across their entire lifecycle.

What Does The Renewable Fuel Standard Mean For Me?

Portlands Renewable Fuel Standard Requirements

 July 1, 2024, Portland required that all diesel fuel sold contain a minimum 15% blend of biodiesel or renewable diesel. This percentage will increase steadily over the next few years, reaching a minimum 99% renewable fuel requirement by July 1, 2030.

There are no reporting requirements for retailers to comply with this mandate. Instead, the city enforces compliance through random on-site inspections and by requiring retailers to maintain records of the biofuel content of the diesel they sell.

Who Does The Renewable Fuel Standard (RFS) Apply To?

  • The policy speaks to “Covered Entities”​
  • Diesel Fuel Transaction within the City of Portland Oregon​
  • Fuel distributors, resellers, retailers, nonretail dealers, terminals, importers and wholesale purchaser-consumers are directly regulated by PCC Chapter 16.60 and referred to as “covered entities.”
  • Wholesale Purchaser-Consumers​: also know as WPCs are directly regulated by PCC Chapter 16.60 and referred to as “covered entities.”​

What Are Considered Wholesale Purchaser-Consumers ?

Wholesale purchaser-consumer (WPC) is a category of entities that own or utilize diesel vehicle fleets and purchase fuel in bulk for delivery into a storage tank at their facility or directly into a vehicles fuel tank. WPCs are required to register with the RFS program.​

A fuel distributor or common carrier delivers on road diesel to your facilities on-site tank such as: ​

  • Bulk Tank​
  • Aboveground Storage Tank (AST)​
  • Underground Storage Tank (UST)​

A fuel distributor delivers on road diesel directly into your vehicles also known as:​

  • On-Site Fleet Fueling​
  • Wet Hose Fueling​

Does The RFS Only Apply To Wholesale Purchaser-Consumers of Diesel Fuel?

Yes, these rules apply to fuel for on-road motor vehicles. Fuels used for the following purposes are not covered by these rules: ​

  1. Railroad locomotives, watercraft, aircraft, and emergency equipment​
  2. Dyed diesel for off-road vehicles​
  3. Dyed diesel for furnaces, boilers, generators​
  4. Propane and liquefied natural gas for vehicles​

What Are The Requirements To Meet The RFS?

Wholesale Purchaser-Consumers are required to meet three primary components of the RFS:​

  1. Biofuel Minimum Content Requirements,​
  2. Carbon Intensity standard,​
  3. Selecting a compliance option, and​
  4. Record keeping.​

What is the biofuel minimum content requirements for Wholesale Purchaser-Consumers ?

Biofuel Minimum Content Requirements for Wholesale Purchaser-Consumers​

  • WPCs in the City of Portland are required to meet the minimum biofuel content requirements for all fuel they purchase for their vehicle fleet. Beginning July 1, 2024, all diesel purchased must include 15% biofuel content, from either renewable diesel or biodiesel. This requirement increases to 50% on July 1, 2026, and 99% on July 1, 2030.​
  • The biofuel content requirements will be enforced through random inspections of fleet facilities to see that they (1) have a contract in place with fuel suppliers that specifies that fuel meets the minimum blend requirements, or (2) verification of actual products purchased through testing or review of product transfer documents.

What is the Carbon Intensity (CI) Standard for Wholesale Purchaser-Consumers ?

  • All WPCs also need to be aware of the Carbon Intensity Standard in PCC Chapter 16.60.​
  • All biodiesel and renewable diesel sold in the City of Portland must have a carbon intensity equal to or less than 40g CO2e/MJ as certified by DEQ’s Clean Fuels Program, Approved Carbon Intensity Values.​
  • Carbon intensity requirements apply to biofuel blendstock, not the final blended products, which may contain a portion of petroleum-based diesel fuel at a higher carbon intensity.​

Selecting a compliance option for Wholesale Purchaser-Consumers​

  • WPCs will need to select a compliance option by the start of the compliance period, July 1, 2024.​
  • Portland Bureau of Planning & Sustainability (BPS) will provide notification about selecting compliance options by May 31, 2024.​
  • To receive notification, covered entities must be registered with the RFS Program. ​

*Compliance option selection may be changed at any time during the compliance period after consulting with BPS. If a covered entity decides to change the compliance option during the compliance period, they are responsible for compliance under the new option for the full compliance period.

Record Keeping Requirements for Wholesale Purchaser-Consumers​

Portland City Code (PCC) Chapter 16.60 and administrative rules requires that an invoice, bill of lading, shipping paper, or other documentation, referred to as “Product Transfer Documents” (PTD) must accompany each fuel delivery in the city of Portland. The administrative rules specify that:​

  1. PTDs must include the type of renewable fuel, including biodiesel, renewable diesel, ethanol, or any blends of these fuels, and declare the volume percent of such renewable fuel.​
  2. PTDs must comply with OAR 603-027-0430 (1) (a) which includes identifying the quantity, the name of the product, the name and address of the seller and buyer, and the date and time of the sale.​
  3. WPCs using the Product Transfer Document compliance pathway must also ensure that fuel pathway codes issued by Oregon Clean Fuels Program are also included on a PTD associated with each delivery received by the WPC or have a contract with a fuel supplier specifying the carbon intensity requirements of PCC Chapter 16.60.​

Contact Us Today To Learn More About The RFS For Your Operations

Contact Us

JOIN THE FUEL MARKET REPORT NEWSLETTER FOR YOUR WEEKLY FILL OF UPDATES!

Sign Up
comparison chart showing difference between off-road diesel and on-road diesel fuel in Portland OR
The Future of Diesel Fuel: Trends & Outlook 940 788 Star Oilco

The Future of Diesel Fuel: Trends & Outlook
Retail Diesel Dispenser Example
Retail Diesel Pumps with a variety of blends of diesel. Biodiesel, Renewable Diesel, and Fossil Diesel blends shown in Portland, Oregon.

Diesel Fuel In Oregon and Washington

Star Oilco has been getting questions on the changes of diesel in Portland, Oregon.  If you have not noticed, many diesel pumps at retail gas stations and cardlock have seen changing stickers on the face of the fuel pumps.  As of July 1st, 2024 the City of Portland requires a minimum 15% biofuel content of all diesel sold.  This policy is called the Portland Renewable Fuel Standard.

This has caused quite a few changes in what fuel pumps have for fuel.  Diesel fuel buyers are noticing the bright yellow color of B20 biodiesel, the water clear color of Renewable Diesel or a a mix of several fuels tinting the color of their diesel.  This trend is bigger than just Portland.

Today on the west coast there are a variety of product label stickers you will see on diesel pumps.  These show the variety of diesel fuel specifications that are being sold to diesel vehicles today. Blends of petroleum ultra low sulfur diesel, R99 (99%) renewable diesel, and B99 (99%) Biodiesel are combined to meet the market needs of the diesel we all buy.

This change is because of a combination of pure market forces, government rules and local decisions by fuel haulers.  Today’s diesel not only has a commodity market for the fuel it also has a market for CO2 credit value and a cap of total petroleum diesel fuel that can be sold into a west coast state with a “Cap and Invest” program requiring blends of low CO2 biofuels, the liquid fuels sold for vehicles.

Add on top of these market forces, advances in technology used to make the liquid diesel fuel.  The diesel arriving at truck stops, gas stations, cardlock or out of a hose from a bulk truck has been changing and it’s often in good ways.  Knowing how can be helpful in navigating why diesel may cost one price or another and may have a need or maintenance that another fuel does not.

THE RISE OF RENEWABLE DIESEL

Renewable diesel is a synthetic diesel fuel made from the same feedstock as biodiesel, but the finished product is hydrocarbon diesel.  Though it is a biofuel, it is also diesel. For fuel regulation they refer to it (as well as biodiesel) as “Biomass Based Diesel” for labeling at the fuel pump.

There have been billions of plant capacity brought online for renewable diesel.  During the COVID collapse of fuel prices a number of petroleum refineries shut down, then upgraded their technology to make hydrocarbon diesel fuels out of the very biobased fats, oils, and greases biodiesel is made from.  These refineries use hydrotreating technology just like they do with a crude petroleum to make an actual hydrocarbon diesel molecule.   With this technology adoption to make diesel and jet fuels from vegetable oils and animal fats billions of gallons of low CO2 diesel fuels are coming on the market and governments are requiring it’s use, such as Portland’s Renewable Fuel Standard.

Renewable Diesel Consumption it the US Source: Alternative Fuels Data Center

THE AVAILABILITY OF BIODIESEL

The US makes billions of gallons of biodiesel.  A fuel that’s quality and performance continues to improve.  If you are not a fan of biodiesel in your fuel thinking strategically about the fuel will likely benefit your fleet operation.  The big concern with diesel fuel in a ultra low sulfur world is water and dirt suspended in the fuel affecting the performance of diesel emission systems.  With clean and drier quality specifications of B99 blend stocks today versus a decade ago the use of this fuel has grown substantially especially in the truck stop market.

When crude petroleum prices are high and therefore refined diesel prices are equally as high biodiesel is often an extremely competitive fuel.  If a large seller of diesel (including petroleum refiners) can pick up pennies per gallons on millions of gallons sold they will do so.  Therefore Biodiesel is often seen in diesel in small blends even if you do not see a label on retail pump.  For blends above 5% a label is required for retail fuel sales. RTHWEST?

R99 Renewable Diesel label indicating 99% biomass-based diesel content
Ultra Low Sulfur Retail Diesel Label
Biodiesel Blend Percentage label for retail diesel dispenser

Above are a variety of labels used to denote what fuel blend is coming out of a retail diesel dispenser. Feel free to call Star Oilco at 503-283-1256 if this confuses you and you want it explained.  We would be glad to do so.

These labels can be found together often at one pump.  All state and Federal standards require ultra low sulfur diesel for any on-road diesel sale.  The Federal standards also adopted by the states require a disclosure at the fuel pump if a blend is above 5% biodiesel.  The max allowable blend of biodiesel for diesel truck manufactures is a 20% blend.  If a truck dealership says that you cannot blend biodiesel up to 20% they need to take that up with the Federal Government because they need to support it.  This is why the label shows a blend may contain between 5% and 20% biodiesel content.

Renewable diesel is a hydrocarbon diesel. 

 

It is diesel meeting the ASTM D975 specification for diesel. 

Retailers selling blends of R99 in their fuel do not need to label it given this.  They still do label it given the benefits of the fuel’s performance and that customers are seeking that fuel.

Contact Us Today To Schedule Your Next Bulk Fuel Delivery

Contact Us

Many retail places will have stacked labels showing they may be blending 5% to 20% biodiesel as well as may be adding R99 Renewable Diesel to the fuel as market conditions dictate it is the more cost competitive fuel.  When seeing a label like this it can usually be assumed they are blending a R80 (80% Renewable Diesel) and a B20 (20% Biodiesel) blend of fuel.  This blend is actually believed by some to be a higher performing fuel seeing better performance that a R99 or B20 fossil fuel blend.

Fossil fuel diesels are being replaced or blended with biomass based diesels.  Be it Renewable Diesel or Biodiesel.  These blends are driven by more than one industry requirements, government rules, or other market forces. One of these being Portland’s banned on petroleum diesel through the Renewable Fuel Standard (RFS). This is resulting in an increase of low-carbon biofuel blends that will ultimately move to a mix of 99% renewable fuel requirement by 2030.

Renewable Diesel and Biodiesel Blend fuel dispenser label.

The big drivers are industry specification for fuels (both labeling as well as chemical characteristics), state rules on selling these fuels, their quality assurance as well as CO2 content, and of course the market forces.  Market forces being the supply and demand availability of fuel needed to meet customers.  Less fuel available to sell means higher prices for customers.

A decade ago the market for diesel was far simpler. Though you had biofuels and some blend mandates basically you had a diesel specification accepted and the daily price as tracked by a lighted retailers sign, a wholesale market average or spot buying by some customers.   Today this market is far more complicated by government regulation on the west coast.  There are three big programs at state levels impacting this.

State Fuel Rules cause a unique need for one state or another. Whereas twenty years ago if Oregon or Washington fuel was selling for more than the Gulf Coast you might see brokers bring fuel into the region then driving down high prices.  With the creation of various complex and unique rules on diesel, imports of fuel to these low CO2 fuel states has dropped.  The amount of people moving product into west coast states has dropped.  The big rules causing this are the Cap and Invest programs of the West Coast states, the Low CO2 Fuel Standards of the states, and the fuel blend mandates of various jurisdictions of these states. For instance California now requires all off-road diesels but 99% renewable diesel.  Portland, Oregon also has a CO2 requirement and minimum 15% blend of biomass based diesel on all fuel sold in the state.

WHAT ARE THE DIESEL FUELS AND THEIR SPECIFICATIONS

Petroleum Diesel:
ASTM D975 Specification.

The ASTM D975 is a series of tests used to maintain consistent industry standard product performance for diesel fuel.  It includes among several tests cloud point, cold filter plug point (CFPP), several masurements of diesel fuel operability performance, intrained water content, sediment, carbon residue, ash, distillation, viscosity, sulfur, copper corrosion, cetane number, cetane index, aromaticity, and conductivity.

Renewable Diesel:
ASTM D975 Specification.

Renewable Diesel is following the same series of tests as petroleum refined diesel fuels.  It is the same ASTM D975 specification. Though Renewable Diesel has some different properties that exceed the ASTM specification of diesel.  Renewable Diesel is highly prized as a fuel because it typically is a cleaner and drier diesel fuel than petroleum diesel. This being seen by the tests on sediment and water content in a parts per million level.  Renewable Diesel content in diesel fuel can also be tested for looking for a C14 molecule (the chain typically created in a Hydrotreated Diesel process from fats, oils and greases.

Biodiesel (Methyl Esther):
ASTM D6751 Specification.

The ASTM for Biodiesel tests a mono-alkyl esters of long chain fatty acids derived from vegetable oils and animal fats. The testing for quality assurance covers an analysis for flash point, methanol, water and sediment, kinematic viscosity, sulfated ash, oxidation stability, sulfur, copper strip corrosion, cetane number, cloud point, acid number, carbon residue, total and free glycerin, phosphorus, reduce pressure distillation temperature, atmospheric equivalent temperature, combined calcium and magnesium, and combined sodium and magnesium.

For more on Biodiesel Use and Handling the National Renewable Energy Laboratory has a great book on the subject.

THE HISTORY OF DIESEL FUEL SPECIFICATIONS IN THE UNITED STATES

In the 1990’s the US EPA passed rules that demanded a phase out of sulfur in diesel fuel.  The presence of sulfur was very good for the fuel’s storage stability as well as fuel lubricity, but was horrible for air quality.   Additionally the big smog contributor was NOx (nitrous oxide) which was one of the EPA’s reason’s for pulling sulfur out of diesel.  For the EPA to get engine manufacturers to treat the NOx emissions at the tailpipe they needed all the sulfur gone (ultra low sulfur diesel) for modern diesel emission systems to be able to eliminate NOx as well as a host of other pollutants including particulates.

The story of changing diesel fuel standards in the US under the EPA is one of removing sulfur from our diesel fuel.  In 1996 the fuel refiners and sellers of diesel had to move the sulfur content of the fuel sold for on-road purposes to below a 500 parts per million standard. Commonly referred to as Low Sulfur Diesel fuel.   In 2006 the standard moved to a maximum of 15 parts per million of sulfur for all on road fuels.

In 2006 while the sulfur content of fuel was dropping the City of Portland released the first mandated blend of biodiesel content.  This being a 5% biodiesel blend.  The next year, the State of Oregon followed with its own Renewable Fuel Standard requiring this throughout the state.  This began the expectation of biodiesel in most diesel fuel in the Portland, Oregon area.  Washington also passed a similar policy for blending biodiesel but the enforcement and need for the fuel is less specific at Washington fuel pumps.

Sign Up To Receive Our Fuel Market Report For Your Weekly Fill Of Updates!

Name
lose-up of a red fuel nozzle at a green diesel pump
Renewable Diesel or Biodiesel: Which Is Better? 683 1024 Star Oilco

Renewable Diesel or Biodiesel: Which Is Better?

What’s the difference and how do they compare in price? 

If you are looking for a cleaner and greener alternative to diesel fuel, you might have come across two options: renewable diesel and biodiesel. Both fuels are made from organic sources, such as vegetable oils and animal fats, but they have different production processes and properties. In this blog post, we will compare renewable diesel and biodiesel in terms of their pros and cons, as well as their prices and incentives in Oregon. 

What is Renewable Diesel? 

Renewable diesel is a fuel that is chemically identical to petroleum diesel, but it is made from renewable raw materials through a process called hydrotreating. Hydrotreating removes impurities and oxygen from the feedstock, resulting in a pure and refined fuel that can be used in any diesel engine without modifications or blending. Renewable diesel (R99) has a high cetane number, which means it ignites easily and burns efficiently. It also has a low cloud point, which means it can withstand cold temperatures without gelling or clogging filters. 

What is Biodiesel? 

Biodiesel is a fuel that is made from renewable raw materials through a process called transesterification. Transesterification converts the feedstock into fatty acid methyl esters (FAME), which are then blended with petroleum diesel at various ratios. Biodiesel can be used in most diesel engines, but it may require some modifications or adjustments depending on the blend level and the engine type. Biodiesel has a lower cetane number than renewable diesel, which means it may not ignite or burn as well. It also has a higher cloud point than renewable diesel, which means it may gel or clog filters in cold weather. 

The cost of renewable diesel and biodiesel depends on various factors, such as the type and availability of feedstock, the production process, the market demand, and the government incentives. In general, renewable diesel is more expensive than biodiesel, as it requires more complex processing and higher quality feedstock. According to the U.S. Energy Information Administration (EIA), the average wholesale price of renewable diesel in California was $3.06 per gallon in October 2021, while the average wholesale price of biodiesel was $2.76 per gallon in the same month. However, both renewable diesel and biodiesel can benefit from federal RIN’s and state credits such as the low carbon fuel standards, which can lower their effective prices and make them more competitive with petroleum diesel. As of July 10th of 2023 renewable diesel (R99) in Portland Oregon was 60 cents higher than biodiesel (B99). 

 Renewable Diesel vs Biodiesel Carbon Intensity 

According to CARB, the carbon intensity of biodiesel ranges from 14.85 to 67.45 gCO2e/MJ and, renewable diesel ranges from 15.84 to 62.86 gCO2e/MJ, depending on the feedstock and production pathway. The lowest carbon intensity for biodiesel is achieved by using waste cooking oil as the feedstock and renewable methanol as the transesterification agent. The highest carbon intensity is associated with using soybean oil as the feedstock and fossil-based methanol as the transesterification agent. The lowest carbon intensity for renewable diesel is achieved by using waste cooking oil as the feedstock and renewable hydrogen as the hydrotreating agent. The highest carbon intensity is associated with using soybean oil as the feedstock and fossil-based hydrogen as the hydrotreating agent. 

Fuel-Pathways-Carbon-Intensity-Values

Pros and Cons of Renewable Diesel and Biodiesel 

Both renewable diesel and biodiesel have some advantages and disadvantages compared to petroleum diesel. Here are some of the main pros and cons of each fuel:  

Renewable Diesel Pros: 

– Reduces greenhouse gas emissions by up to 75% compared to petroleum diesel 

– Reduces tailpipe emissions of particulate matter, nitrogen oxides, carbon monoxide, and hydrocarbons 

– Improves engine performance and efficiency with fewer regeneration cycles of the emissions system 

– Compatible with existing infrastructure and vehicles 

– Biodegradable and nontoxic 

Renewable Diesel Cons: 

– More expensive than petroleum diesel 

– Limited availability and supply 

– May increase emissions of sulfur dioxide 

Biodiesel Pros: 

– Reduces greenhouse gas emissions by up to 78% compared to petroleum diesel 

– Reduces tailpipe emissions of particulate matter, carbon monoxide, and hydrocarbons 

– Biodegradable and nontoxic 

– Supports domestic agriculture and energy security 

 Biodiesel Cons: 

– May increase emissions of nitrogen oxides 

– May cause engine problems such as injector coking, filter plugging, corrosion, and reduced lubricity 

– May degrade over time or when exposed to water or microbes 

Oregon Prices and Incentives for Renewable Diesel and Biodiesel 

Oregon is one of the states that has adopted a Clean Fuels Program (CFP), which aims to reduce the carbon intensity of transportation fuels by 10% by 2025. The CFP creates a market for low-carbon fuels such as renewable diesel and biodiesel by requiring fuel suppliers to either blend them with petroleum diesel or buy credits from low-carbon fuel producers. The CFP also provides incentives for consumers to use low-carbon fuels by reducing their fuel taxes. 

According to the Oregon Department of Environmental Quality (DEQ), the average price of diesel in Oregon as of November 2021 was $3.87 per gallon. The average price of biodiesel blends ranged from $3.88 per gallon for B5 (5% biodiesel) to $4.01 per gallon for B20 (20% biodiesel). The average price of renewable diesel was $4.05 per gallon. As of July 2023 the price of renewable diesel (R99) in Oregon was 50 to 60 cents higher than biodiesel (B99). 

The DEQ also provides a Fuel Cost Calculator that allows consumers to compare the costs and benefits of different fuels based on their vehicle type, fuel efficiency, annual mileage, fuel price, carbon intensity, and tax rate. According to the calculator, using renewable diesel instead of petroleum diesel would save an average consumer $34 per year in fuel costs and reduce their carbon emissions by 1.6 metric tons per year. Using biodiesel instead of petroleum diesel would save an average consumer $12 per year in fuel costs and reduce their carbon emissions by 0.8 metric tons per year. 

Renewable diesel and biodiesel are both viable alternatives to petroleum diesel that can help reduce greenhouse gas emissions and support renewable energy sources. However, they also have some trade-offs in terms of cost, availability, performance, and emissions. Consumers should consider their vehicle type, driving habits, fuel preferences, and environmental goals when choosing between these fuels. Oregon offers some incentives and programs to encourage the use of low-carbon fuels such as renewable diesel and biodiesel, which can help consumers save money and reduce their carbon footprint. 

Green diesel nozzle fueling refrigerated trailer in Portland snow
Do you have questions about Renewable Diesel in Oregon? 1024 768 Star Oilco

Do you have questions about Renewable Diesel in Oregon?

Renewable Diesel delivered in Oregon

Renewable Diesel vs Petroleum Diesel Burn Test

Imagine a superior next generation renewable diesel direct to your fleet.

___________________

Star Oilco is delivering R99 Renewable Diesel to fleets now.

Renewable Diesel delivered to your fleet by mobile onsite fueling or in bulk.

Imagine a fuel that is cleaner and drier than your typical diesel fuel bought in Oregon.  Now imagine that this dry and clean characteristic means a better performing fleet.  A fuel that causes less maintenance and increased performance benefits as it relates to your modern Tier 3 Diesel Emission systems.  Fewer DPF (particulate trap) regens and other post engine maintenance issues in your fleet while more power and up time reported by the drivers behind the wheel.  Now add to that a more than half reduction in CO2 emissions and Oregon has incentives for the adoption of this fuel because it is a biofuel.  A biofuel that outperforms traditional diesel in performance, emissions, and in lifecycle analysis.

That next generation biofuel is her, Renewable Diesel!

Star Oilco can deliver Renewable Diesel to your tank in Oregon and Washington.  If you are looking at this fuel we will work hard to make it easy for you regardless of how small or large your fleet. It is immediately available for bulk customers.   If you are interested in mobile on-site refueling, wet-hosing, construction job site fueling, or a retail option for the fuel we can work with you as well to make that happen.

Renewable Diesel: A Next Generation low CO2 Diesel Fuel.

This product is available in Oregon and we are excited to make getting this fuel simple.  Star Oilco is a proud seller Renewable Diesel product. If decarbonizing your fleet is your goal  while reducing the total cost of maintenance on your fleet, Star Oilco is ready to serve your needs.

Renewable Diesel is available from several manufacturers of Renewable Diesel shipped to Oregon, Washington and California.  This product being made available given it’s lower than petroleum CO2 emissions meeting the Low Carbon Fuel standards created by California, Oregon, and expected in Washington state.

Renewable Diesel clean burning

For more on Renewable Hydrocarbons, please check out the US Department of Energy’s Alternative Fuels Data Center page on the subject. 

Call Star Oilco with any questions you may have about Renewable Diesel, Biodiesel, Ethanol or other emerging alternative fuels.  We have a track record of making alternative fuels easy for those wanting to use them. Call 503-283-1256 or email OrderDesk@Star Oilco.net and we can get you in conversation with our team about a future fuel available today.

Star Oilco Crest

Star Oilco is delivering R99 Renewable Diesel to fleets in bulk and by mobile onsite fueling.

Contact Form

  • This field is for validation purposes and should be left unchanged.

For more on Renewable Diesel please also see the following:

Renewable Diesel as a major Transportation Fuel in California

Every Question Star Oilco has been asked about Renewable Diesel

Renewable Energy Group’s Ultra Clean Diesel (Renewable Diesel fuel blends)

home insulation representing energy efficiency for renewable fuel standard compliance in Portland Oregon
Portland Renewable Fuel Standard Explained 1024 683 Star Oilco

Portland Renewable Fuel Standard Explained

Did you hear about the time Portland banned fossil fuel diesel?

Portland is making a big move to provide cleaner air and reduce greenhouse gas emissions. Portland has implemented what’s called the Renewable Fuel Standard (RFS) beginning  its first phase on May 15th, 2024. The RFS policy in Portland mandates that there has to be an increase of use of low-carbon biofuels in diesel within city limits of Portland. This is part of the ultimate Climate Emergency plan. This RFS mandate was first implemented in 2006 as a B5 (5%) Biodiesel blend mandate with the goal of mandating a 20% blend. The RFS is the first of its kind not only in Oregon but in the entire United States. Portland’s reputation as a leader in environmental sustainability efforts continues. 

Portland’s Phases To Implement Almost 100% Renewable Diesel

What makes Portland’s mandate unique is the requirement that the biofuels have a CO2 value so low it bars most American made biodiesels. The blending requirement starts at 15% in 2024, and then it will steadily increase to 50% by 2026 and will reach 99% by 2030. This schedule demonstrates how Portland’s low-carbon ambition is present to transition away from fossil fuels and promote alternative energy sources.

This policy is expected to reduce air pollution and carbon emissions. It will also create new markets for biofuels, which will lead to increased economic opportunities. This will ultimately help the city become a more sustainable and environmentally friendly place to live as Portland has taken the lead in striving for sustainability over the years.

The policy will also help create jobs in the biofuel industry and provide opportunities for businesses to switch to renewable energy sources. It will also help reduce the city’s dependence on fossil fuels and protect the environment for future generations.

Want to learn more about meeting Portland’s requirements for the Renewable Fuel Standard mandate?

Contact Us
landscape view of Mount Hood representing Star Oilco’s fuel delivery service area in Oregon

Focus on Lower-Emission Biofuels

Uniquely, Portland’s RFS goes beyond just the biofuel blend. It also sets a strict carbon intensity (CI) standard for the biofuels themselves. This ensures the biodiesels used have a significantly lower carbon footprint compared to traditional options. Biodiesels produced domestically often fall short of this CI requirement, prompting many suppliers to look to renewable diesel sources. This focus on biofuels with a lower lifecycle carbon footprint makes Portland’s RFS even more impactful in reducing greenhouse gas emissions.

Iconic Portland sign on Broadway at dusk with city buildings in the background

Exemptions and Implementation Details

The initial phase of the RFS targets on-road diesel sales. This applies to diesel purchased at gas stations, by mobile fueling companies, and for use in large stationary tanks. However, the long-term goal includes all diesel use within the city. Some temporary exemptions apply to off-road diesel uses such as heating oil, generator fuel, aircraft fuels, watercraft fuels, and other dyed fuel users. One local truck stop, Jubitz Truckstop, was granted a temporary exemption. This is likely due to concerns about disrupting critical transportation operations. Daimler (the manufacturer of Freightliner and Western Star trucks) has a research facility in Portland. Daimler was also granted an exemption to meet their specific fuel needs for testing purposes. 

The RFS enforces compliance through fuel sampling and requires documentation proving the fuel meets the minimum biofuel content and CI standards. Businesses that purchase diesel need to be able to show their compliance through bills of lading (BOLs) or similar records from their fuel provider, like Star Oilco. If a business does not comply and provide this documentation, it can result in pretty hefty fines. First offenses can be a fine of $10,000 per day. Repeat offenders will end up facing even bigger penalties of up to $15,000 per day. These fines can really show the impact of how serious Portland is taking this initiative. 

Impact on Businesses and Consumers

While residential consumers who don’t purchase diesel directly are not directly impacted, businesses purchasing diesel, especially in bulk, will need to adapt to the new regulations. This may involve acquiring documentation from fuel suppliers or entering into contracts guaranteeing compliant fuel blends. Wholesale fuel distributors, who sometimes purchase from multiple vendors and blend fuel mid-route, may face additional challenges in tracking the biofuel content and CI of their product. However, as the program matures, the industry is expected to adapt and streamline these compliance procedures.

Contact Us Today To Discuss What This Means For Your Business

Contact Us

A Step Forward for Cleaner Transportation

Portland’s ambitious RFS sets a new expectation for sustainable transportation. Promoting low-carbon biofuels allows Portland to aim to significantly reduce its reliance on fossil fuels and be able to contribute to cleaner air for its residents. The RFS program will be able to serve as a model for other cities that are looking at implementing similar initiatives. Great job Portland for paving the way to a sustainable future for other cities! Although challenges will remain, as businesses adapt to this new norm, Portland’s RFS represents a significant step forward in creating a more sustainable transportation sector.

The RFS program is an important step in the fight towards sustainability and lower carbon fuels. It sends a clear message that cities are willing to take action to reduce emissions and protect the environment. We anticipate that other cities will follow Portland’s lead and create similar initiatives. This will have a significant impact in reducing emissions and helping to protect the environment.

It is a positive step towards a more sustainable future. Alternative fuels have become more and more readily available. Investing in alternative fuels and reducing carbon emissions is essential for protecting the planet for future generations. Governments should prioritize investing in renewable energy sources and incentivize communities to switch to alternative fuel solutions.

Thank you for choosing Star Oilco as your preferred fuel provider in Portland and Vancouver, Washington. Give us a call to discuss how the RFS mandate can affect your business and one of our team members would be happy to discuss this with you.

JOIN THE FUEL MARKET REPORT NEWSLETTER FOR YOUR WEEKLY FILL OF UPDATES!

Name
Close-up abstract image of diesel fuel with suspended droplets and fluid motion
What is Heating Oil? 1024 512 Star Oilco

What is Heating Oil?

                In the Pacific Northwest heating oil is diesel

New heating oil customers often ask us, “What is heating oil?” Heating oil is diesel fuel and there are several grades and types. For Star Oilco our standard heating oil product is a ultra low sulfur diesel with a 5% biodiesel blend in order to meet Oregon mandates for off-road diesel fuel. That way our heating oil trucks can also serve construction fueling, emergency back up generators, and other common off-road diesel uses.

Star Oilco has a simple Heating Oil FAQ available.

For full on fuel nerds though, check out this more in depth deeper technical dive below.  If we leave anything out please don’t hesitate to ask for those seeking a nerd-level understanding of heating oil, kerosene and bioheat.

There are three typically grades of heating oil you can order

Number 1 Diesel

Number 1 diesel is also called Kerosene or Stove Oil. This fuel has a lighter specification than typical heating oil which enables it to burn better in a “pot burner” or wick heater. Kerosene has its own specification as the fuel used by wick heaters. Kerosene is typically Number 1 diesel but not all Number 1 diesel’s are kerosene due to the need to be taken up by a wick heater. Any biodiesel content in a kerosene product WILL NOT work in a wick kerosene heater. So be very aware of confirming that your kerosene has never come into any contact with a biodiesel blend of fuel.

Red Number 2 Diesel

Red dyed diesel also called Heating Oil, Dyed Diesel, Off-Road Diesel is the default heating oil fuel. The fuel is dyed red to denote no on-road fuel taxes are attached to it. When you call and ask for heating oil, this is the fuel you are requesting. Clear or Green Number 2 Diesel is the fuel sold at retail gas stations and truck stops. That fuel will also work in your furnace, you just are paying for on-road taxes attached to that fuel.

Bioheat or Biodiesel Heating Oil

“Bioheat” is a blend of biodiesel and petroleum diesel to make a lower emission and lower CO2 heating fuel.  Typically Bioheat is Number 2 Heating Oil with a 20% blend of biodiesel or higher in it. It is a drop-in fuel for your heating oil furnace. There is no change other than routine maintenance is required. It is a cleaner burning fuel with a significant drop in CO2 emissions associated with your heating oil fuel consumption.  If you would like more information on biodiesel as a heating oil you can follow this link.

B20 Biodiesel Heating oil provider

Where do heating oil companies get their fuel?

In the Portland, Oregon market, diesel is fungible. Everyone buys or is expected to mix their fuel from each other in some way. Primarily this is due to the Portland/Vancouver market receiving most of its fuel down the Kinder Morgan-operated Olympic Pipeline. Which means all the refiners transporting fuel are mixing their product in transit. Additionally, there are shared terminal locations, which also have co-mingled owned diesel products.

Every refiner is typically expecting to mix their diesel and gasoline products. The difference is in the care a vendor takes to filter the fuel, using additives and continuously check their fuel quality. If you are buying at the absolute lowest price possible, know that there is an incentive to skip any added value of quality assurance.

Star Oilco buys our diesel products from a variety of vendors. The source refiner typically being either BP, Shell, Marathon(formerly Tesoro), Phillip 66, or a number of other refiners.

Portland, Oregon and Vancouver, Washington are not unique in in having fungible diesel and heating oil fuel specifications. Through its Pacific Operations unit, Kinder Morgan operates approximately 3,000 miles of refined products pipeline that serves Arizona, California, Nevada, New Mexico, Oregon, Washington and Texas. With roots dating back to 1956, it is the largest products pipeline in the Western U.S., transporting more than one million barrels per day of gasoline, jet fuel and diesel fuel to our customers. The company-owned terminals also provide additional services, such as liquid petroleum product storage and loading facilities for delivery trucks.

The heating oil and biofuel blends Star Oilco sells its customers

Heating oil is essentially off-road diesel. You can legally use a higher sulfur content for boilers and heating systems than you can off-road equipment and back-up generators. Regardless, we sell the lowest sulfur fuel available and optimize our fuel to be as versatile to our customers as possible. Construction equipment, back up generators and a host of others systems use off-road diesel, as do heating oil systems. Star Oilco sells the same diesel fuel specification for all of our off-road uses.

We also blend this fuel with biodiesel for our customers that want higher blends of low CO2 biodiesel fuels and heating oil. Star Oilco carries nothing but ultra low sulfur diesel fuels. In fact, our minimum blend of biodiesel is a B5 biodiesel blend (5% biodiesel and 95% petroleum diesel) and we also offer B20 (20% biodiesel blend) and B99 (99% pure biodiesel) for our customers.

About Diesel Fuels Specifications 

In the United States, diesel fuel is controlled according the American Society for Testing and Materials Standard D975-97. This standard describes a limited number of properties that diesel fuels must meet. It should be noted that the requirements are all performance-based, meaning they do not mandate the composition of the fuel, only the specific performance related requirements demanded of a fuel for a diesel engine. The requirements of D975 are described below.

ASTM Specifications for Diesel Fuel Oils (D975)*

*More info on ASTM specifications

Diesel fuel is characterized in the United States by the ASTM standard D975, which identifies five grades of diesel fuel. We are only going to talk about the two most popular commercially diesel fuel used — No 1 and No. 2 diesel. The ASTM D975 standard is made up of a series of different tests that check the characteristic ranges of a fuel to confirm it is adequate to operate in your equipment.

In simple terms, they are checking for specific gravity, the vapor point (when it turns into a gas), the flash point (when it catches fire), the dirt content, water content (how much microscopic entrained water) and a host of other requirements diesel must meet in order to be legal to be sold for use in your engine.

Grade No. 1-D and Ultra-Low Sulfur 1-D:

This is a light distillate fuel for applications requiring a higher volatility fuel to accommodate rapidly fluctuating loads and speeds, as in light trucks and buses. The specification for this grade of diesel fuel overlaps with kerosene and jet fuel, and all three are commonly produced from the same base stock. One major use for No. 1-D diesel fuel is to blend with No. 2-D during winter to provide improved cold flow properties. Ultra-low sulfur fuel is required for on-highway use with sulfur level < 0.05%. 

Grade No. 2-D and Ultra-Low Sulfur 2-D:

This is a middle- or mid-grade distillate fuel for applications that do not require a high volatility fuel. Typical applications include high-speed engines that operate for sustained periods at high load. Ultra-low sulfur fuel is required for on-highway use with sulfur level < 0.05%.

Biodiesel Fuels for Heating Oil

Biodiesel is a renewable fuel produced from oil seed crops, used cooking oil, and/or animal fat waste. It is chemically similar to petroleum diesel, and is produced by combining the oil stock with catalysts and then heating it. Biodiesel is not the same as vegetable oil or SVO (straight vegetable oil) and can be used in any diesel engine.

Biodiesel and biodiesel blends significantly reduce tailpipe emissions, especially carbon dioxide, carbon monoxide, sulfur dioxide and particulates (black smoke). ASTM D975 standard, as of 2008, allowed up to 5 percent biodiesel to be blended into the fuel. This is the called B5 — the ‘B’ stands for biodiesel and 5 stands for up to 5 percent biodiesel.

B6 to B20 – ASTM D7467-17:

Diesel blends up to 20% and more than 6% are referred to as B20. Biodiesel is a cleaner burning fuel than petroleum diesel. Using biodiesel can help reduce the amount of harmful emissions released into the air. Emissions such as sulfur dioxide, carbon monoxide, polycyclic aromatic hydrocarbons and other compounds found in diesel exhaust. Read the ASTM D7467-17 standards.

B99 & B100 –  ASTM D6751-15ce1:

These are fuels made of up to 100% biodiesel. Due to environmental regulations, most retailers will carry a maximum of B99. The standards for B99 and B100 are identical. Unlike gasoline, biodiesel can gel at cold temperatures. This can cause stress on fuel pumps and fuel injection systems, or can clog filters or even become too thick to pump to the engine. B99 has a higher temperature gel rate – meaning that it begins to cloud and thicken at higher temperatures – than conventional diesel.

“The cloud point of soybean biodiesel is about 34°F (1°C), whereas the cloud point for No. 1 diesel is about – 40°F (-40°C) and for No. 2 diesel between -18°F (-28°C) and +20°F (-7°C).” (Biodiesel Cloud Point and Cold Weather Issues) The solutions for cold weather involve additives and lower blends to ensure continuous operations. Read the ASTM D6751-15ce1 standards.

 

FURTHER READING ON DIESEL FUEL:

For a question and answer format about heating oil please see: Every question Star Oilco has been asked about Heating Oil

Here is an article about: an In-depth look at Biodiesel as a heating fuel 

Read about Star Oilco’s approach to Fuel Quality Assurance: Star Oilco – Precision Fuel Management

Read about dealing with biological growth in your diesel tank: Bioguard Plus 6 biocide treatment for diesel

Get Chevron’s Technical Manual to Diesel Fuel (essentially an easy to read text book on diesel): Chevron’s Fuel Technical Review

Get a white paper from Donaldson Filtration on tier 4 engines and fuel cleanliness: Donaldson on Tier 4 Engine Fuel Contamination

Read more about Donaldson Desiccant Breathers for bulk diesel tanks: Why use a Donaldson Desiccant Breather for a bulk diesel storage tank.

Bio-diesel and Feed-stock samples at REG
What Types of Feedstock Can Be Used To Make Biodiesel? 700 525 Star Oilco

What Types of Feedstock Can Be Used To Make Biodiesel?

               What Types Of Feedstock Can Be Used To Make Biodiesel?

        To answer what feedstocks can be used to make biodiesel we need to first answer:  What is Biodiesel?

Biodiesel is created through a process called transesterification.  Transecterification is when an alcohol such as methanol or ethanol is added to an oil or fat.  This creates methyl esters and glycerin.  Methyl esters is the scientific name of Biodiesel.  Because biodiesel needs a fat or an oil to start with, this fuel can can be created with any number of feedstocks.  If you would like to learn more about Biodiesel check out this for more questions about biodiesel.

According to the U.S. Office of Energy Efficiency & Renewable Energy:

“A feedstock is defined as any renewable, biological material that can be used directly as a fuel, or converted to another form of fuel or energy product. Biomass feedstocks are the plant and algal materials used to derive fuels like ethanol, butanol, biodiesel, and other hydrocarbon fuels. Examples of biomass feedstocks include corn starch, sugarcane juice, crop residues  such as corn stover and sugarcane bagasse, purpose-grown grass crops, and woody plants. “

Renewable Energy Group (REG) performed a study in 2009 with the support of the Iowa Power Fund Board and the Iowa Office of Energy Independence that tested 36 individual feed-stocks.  Star Oilco will be spotlighting these feedstocks through our blog and our social media. The full report can be found on their site if you would like to read ahead or explore the results in more depth. We hope you find these as interesting as we did!

Bio-diesel and Feed-stock samples at REG

Above photo taken at REG headquarters in Ames, Iowa.

This first blog highlights the following 2 types of feed-stock:

                                                            Babussa Oil & Beef Tallow

Babassu Oil

Attalea speciosa

Babassu oil is extracted from the seeds of the babassu palm tree, Attalea speciosa, an evergreen tree growing to 30 m (98ft) by 20 m (65ft) at a slow rate. It is hardy to zone (UK) 10 and is not frost tender. The flowers are pollinated by bees and other insects. The tree is common in Brazil, Mexico, and Honduras; it grows well in areas typically cultivated for coconut or palm. The kernels contain 60-70% oil, appear transparent, and smell like walnuts. In its natural form the oil is liquid at 20-30°C (68 – 86°F). The seeds are edible and the oil is used in margarine, soaps, detergents, lamp oil and skin products. Oil extraction results in a cake containing 15-25% protein (depending on the shell content), which is a valuable feedstuff.

In February 2008, Babassu palm oil and coconut oil were blended with jet fuel to power a Virgin Atlantic Boeing 747 during a test flight from London’s Heathrow to Amsterdam.

Babassu oil is extracted from the seeds of the babassu palm treeBabassu Oil Chart

Beef Tallow

Tallow is a rendered form of the waste fats and greases from processing beef. Rendering is a process by which lipid material is separated from meat tissue and water under heat and pressure. Beef tallow is primarily made up of triglycerides and it is solid at room temperature. The B100 that is created from this source has a very high cloud point. “Cloud point is the temperature at which wax (paraffin) begins to separate when oil chilled to a low temperature, and it serves as an important indicator of practical performance in automotive applications in low temperatures.”  (Source)  The other uses for tallow include animal feed, soap, cooking and in the past, candles.

Beef Tallow Animal tissue is converted to tallow using rendering; a process by which lipid material is separated from meat tissue and water under heat and pressure.Beef Tallow Chart

 

Article 2 Feedstock : Borage Oil & Camelina Oil

Article 3 Feedstock : Algae Oil & Canola Oil.

Article 4 Feedstock : Castor Oil and Choice White Grease

Article 5 Feedstock : Coconut Oil and Coffee Oil

Article 6 Feedstock : Evening Primrose Oil and Fish Oil

Article 7 Feedstocks : Hemp Oil & High IV and Low IV Hepar

Article 8 Feedstocks : Jatropha Oil, Jojoba Oil, & Karania Oil

Article 9 Feedstocks : Lesquerella Oil & Linseed Oil

Article 10 Feedstocks – Moringa Oil & Neem Oil

Article 11 Feedstocks – Palm Oil & Perilla Seed Oil

Article 12 Feedstocks – Poultry Fat & Rice Bran Oil

Article 13 Feedstocks – Soybean Oil & Stillingia Oil

Article 14 Feedstocks – Sunflower Oil & Tung Oil